ABB IRB 6700 Series - Page 609

NoteAction
Tightening torque: 120 Nm.Torque tighten all screws.6
xx1700002038
Remove the guide for the reduction gear.7
Preparations before refitting the arm system
NoteAction
Remove old residues of flange sealant and
other contamination from the contact sur-
faces on the gearbox.
1
Wipe clean the contact surfaces from any
remaining contamination.
2
Flange sealant: 12340011-116 (Loctite 574)
xx1700002198
Apply flange sealant on the contact surface
of the gearbox.
3
Continues on next page
Product manual - IRB 6700 609
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.8.1 Replacing the axis-1 gearbox (IRB 6700 - 235/2.65, IRB 6700 - 205/2.80, IRB 6700 - 175/3.05, IRB
6700 - 150/3.20, IRB 6700 - 200/2.60, IRB 6700 - 155/2.85)
Continued