NoteAction
Put some grease on the o-ring.5
Fit the o-ring in the groove of the gearbox.6
xx1400000717
Foundry Plus:
Apply Loctite 574 on the surface shown in
the figure.
7
Refitting the axis-6 gearbox
NoteAction
CAUTION
Whenever parting/mating motor and gear-
box, the gears may be damaged if excess-
ive force is used.
1
xx1700001601
Fit the gearbox to the wrist.
CAUTION
Be careful not to damage motor pinion or
gears!
2
Continues on next page
782 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.8.6 Replacing the axis-6 gearbox
Continued
To Next Page
Loading...
