NoteAction
VK cover, 100x10, 3HAA2166-13Refit the VK-cover.
Note
Temporarily remove the screw on the
cradle to let go of overpressure if the VK
covers are hard to fit.
xx1700001800
8
xx2200001464
Grease: 3HAA1001-294Remove both the screw and the protection
plug, then refill grease from the inner hole
(See figure).
9
xx2300000004
xx2300000005
Refit the screw (including washer) and the
protection plug.
10
Wipe clean from residual grease.11
Continues on next page
228 Product manual - IRB 6710
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.3.3 Replacing the rear bearings on the balancing device
Continued
To Next Page
Loading...
