Preparations before refitting the axis-1 gearbox
NoteAction
Cleaning agent: IsopropanolWipe the contact surfaces between gearbox
and base clean from any contamination.
1
xx1700000567
Lifting eye: 3HAC16131-1Fit the lifting accessories in opposite holes
in the gearbox.
CAUTION
Leave a couple of millimeters of space
between the lifting accessory and the surface
of the gearbox. This is done in order not to
damage the surface of the gearbox which is
a sealing surface.
2
xx2200001416
CAUTION
The weight of the gearbox is 85 kg
All lifting accessories used must be sized
accordingly.
3
Continues on next page
Product manual - IRB 6710 453
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.8.1 Replacing the axis-1 gearbox
Continued
To Next Page
Loading...
