Rust preventive (Mercasol 3106)G
Upper armH
TilthouseJ
Taper roller bearing, D=50/80 T=24(2 + 2 pcs)K
RingL
Shaft (2 pcs)M
Sealing ring with dustlip, D=70/85 T=8 (2 pcs)N
Lock nut KM (DIN981), dimension M45O
Required equipment
NoteArt.no.Equipment, etc.
VK 19x6 (2 pcs)VK cover
VK cover
D=70/85 T=8 (2 pcs)3HAB3701-19Sealing ring
3HAA2103-13Taper roller bearing
3HAC039277-002Press tool, premounting bearing
3HAC039993-002Press tool, mounting axis 6
T = 2 mm3HAC039277-006Shims
Tribol GR 100-2 PD3HAB9408-1Grease
Mercasol 3106Rust preventive
Loctite 2433HAB7116-1Locking liquid
Content is defined in section
Standard tools on page 389.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
For art. no. see chapter Circuit
diagrams on page 395.
Circuit diagram
Continues on next page
Product manual - IRB 760 195
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.2 Replacing the tilthouse unit
Continued
To Next Page
Loading...
