NoteAction
xx1000001075
Press out the shaft with the press tool.15
xx1000001076
Remove the press tool, mounting axis 6 and
the shaft.
16
Check that the tilthouse is secured in a over-
head crane or similar before proceeding with
the next shaft.
17
Follow steps above.Remove the shaft on the axis 3 side in the same
way.
18
CAUTION
The robot tilt house weighs 85 kg.
All lifting accessories used must be sized ac-
cordingly!
19
Continues on next page
Product manual - IRB 760 203
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.2 Replacing the tilthouse unit
Continued
To Next Page
Loading...
