ABB IRB 760 Series - Page 239

NoteAction
Specified in Required equipment on
page 236.
Lubricate the bearings properly with bearing
grease.
2
Specified in Required equipment on
page 236.
xx1000001086
Apply sealing compound on the surface of
both shaft ends wher the spacer rings will
be fitted.
3
xx1000001258
Refit the sealing/spacer rings to the shaft
ends on the link and frame.
4
Continues on next page
Product manual - IRB 760 239
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.5 Replacing the linkage - lower link arm
Continued