NoteAction
xx1000001253
Remove the lower link arm by lifting it
straight out.
Note
The support washers on the inside of the
rod can stick to the grease of the bearings
when the rod is being removed. Remove
them from the rod!
5
xx1000001255
Support washers: 1 + 1 pc
Spacer rings, complete: 1 + 1 pc
Remove the inner support washers and the
sealing/spacer rings.
6
Remove residual grease and sealing com-
pound.
7
Refitting, lower link arm
Use this procedure to refit the lower link arm of the linkage.
NoteAction
Spare part no. is specified in Required
equipment on page 236.
If needed, replace the bearings.
Note
The bearings are sensitive for pushes. Make
sure they are not damaged!
1
Continues on next page
238 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.5 Replacing the linkage - lower link arm
Continued
To Next Page
Loading...
