NoteAction
xx1000001114
With the help of the ball bearing puller carefully
remove the balancing device from its upper and
lower attachments.
11
Remove the balancing device and put it in a
safe place.
12
xx1000001116
Remove upper and lower spacer rings and
support washers (2+2 pcs).
13
Remove residual grease and sealing compound.14
Refitting, balancing device
use this procedure to refit the balancing device.
NoteAction
Check the bearings. Replace if needed.1
Continues on next page
282 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.5.1 Replacing the balancing device
Continued
To Next Page
Loading...
