ABB PST Series - Page 112

112 1SFC132003M0201
)LHOGEXVFRPPXQLFDWLRQRSWLRQ
&KDSWHU
*) For the purpose of having one common EDS for the
whole range of softstarters, "Setting Ie", "1st Set Ie", "2nd
Set Ie" and "3rd Set Ie" have the range 0 - 3000 Amp. The
softstarter in itself will have a much more narrow range
defined by its rated current and only values within the
softstarter’s range will be accepted. Other values will be
left out.
96 Read SOP4 Thyristor Parameter 4 1,0 – 20,0
1R 7\SH 3DUDPHWHU 'HVFULSWLRQ 5DQJH 8QLW
%LW0DVNIRU(YHQWV
RQ5HOD\RXWSXWV
Bit 0 Overload
Bit 1 Fault
Bit 2 High I
Bit 3 SCR OL
Bit 4 Locked Rotor
Bit 5 Underload
Bit 6 Phase Imb
Bit 7 PTC
Bit 8 Phase Rev
Bit 9 Warn OL
Bit 10 Warn SCR OL
Bit 11 Warn I=High
Bit 12 Warn I=Low
Bit 13 Spare
Bit 14 Spare
Bit 15 Spare