ABB PST Series - 7:2.4.3 Warnings

81
1SFC132003M0201
6HWWLQJVDQGFRQILJXUDWLRQ
&KDSWHU
 :DUQLQJV
To set parameters related to the warnings, enter the
Warnings group:
:DUQLQJKLJKFXUUHQW:DUQ, +LJK
Activate the warning function if required by changing to
<HV.
Press 6WRUH to save the selected operation
:DUQLQJKLJKFXUUHQWOHYHO:D, +/HY
Set the level of the high current warning.
Available only if the function is selected.
Press 6WRUH to save the selected operation.
:DUQLQJORZFXUUHQW:DUQ, /RZ
Activate the warning function if required by changing to
<HV.
Press 6WRUH to save the selected operation.
:DUQLQJORZFXUUHQWOHYHO:D, //HY
Set the level of the low current warning.
Available only if the function is selected.
Press 6WRUH to save the selected operation.
:DUQLQJRYHUORDG:DUQ2/
Activate the warning function if required by changing to
<HV.
Press 6WRUH to save the selected operation.
:DUQLQJRYHUORDGOHYHO:D2//HY
Set the level of the overload warning.
Available only if the function is selected.
Press 6WRUH to save the selected operation.
:DUQLQJ6&5RYHUORDG:DUQ6&52/
Activate the warning function if required by changing to
Yes.
Press 6WRUH to save the selected operation.
Functional Settings
Start/Stop
Protections
Warnings
Inputs
Faults
Outputs
Fieldbus
)LJXUH :DUQLQJVJURXS
Settings
Seq Start