ABB PST Series - Chapter 6 Human-Machine Interface (HMI); 6:1 Overview

51
1SFC132003M0201
+XPDQ0DFKLQH,QWHUIDFH+0,
&KDSWHU
&KDSWHU+XPDQ0DFKLQH,QWHUIDFH
+0,
This chapter describes how the human-machine interface
(keypad and display) works.
 2YHUYLHZ
 $SSOLFDWLRQ
The Human-Machine Interface is used for several
purposes such as programming the softstarter, i.e setup of
inputs and outputs, protection functions, warning levels,
fieldbus communication etc. The HMI is also used for
monitoring, local control and status information of the
softstarter.