ABB PST Series - 7:2.4.4 Faults

82 1SFC132003M0201
6HWWLQJVDQGFRQILJXUDWLRQ
&KDSWHU
 )DXOWV
3KDVHORVVW\SHRIRSHUDWLRQ3K/RVV2S
Select what operation shall be asserted if a phase loss
fault occurs:
Stop–M The motor will stop and a manual reset is
required.
Stop–A The motor will stop and an automatic reset is
performed and the motor will restart.
Press 6WRUH to save the selected operation.
%\SDVVIDXOWW\SHRIRSHUDWLRQ%3)DXOW2S
Select what operation shall be asserted if a by-pass fault
occurs:
Stop–M The motor will stop and a manual reset is
required.
Stop–A The motor will stop and an automatic reset is
performed and the motor will restart
Press 6WRUH to save the selected operation.
)LHOGEXVIDXOWW\SHRIRSHUDWLRQ)%)DXOW2S
Select what operation shall be asserted if a fieldbus
communication fault occurs:
Stop–M The motor will stop and a manual reset is
required.
Stop–A The motor will stop and an automatic reset is
performed and the motor will restart.
Press 6WRUH to save the selected operation.
Functional Settings
Start/Stop
Protections
Warnings
Inputs
Faults
Outputs
Fieldbus
)LJXUH )DXOWVJURXS
Settings
Seq Start