ABB PST Series - 1:2.2 Chapters included; 1:2.3 Revision notes

10 1SFC132003M0201
,QWURGXFWLRQ
&KDSWHU
 &KDSWHUVLQFOXGHG
• ,QWURGXFWLRQ introduces the reader to this manual.
• 4XLFNVWDUW contains information on how to, in the
quickest way, install the softstarter and put it into oper-
ation. This chapter is intended for the experienced user.
• 'HVFULSWLRQ describes the softstarter in general, its
functions and specifications.
• 0RXQWLQJ contains information on receiving, unpack-
ing and mounting the softstarter.
• &RQQHFWLRQ contains instructions on how to make the
electrical connections as well as connections for com-
munication devices.
• +XPDQ0DFKLQH,QWHUIDFH describes the local Human-
Machine Interface, how it works and what it contains.
• 6HWWLQJVDQGFRQILJXUDWLRQ describes all possible set-
tings and how to navigate in the menu system.
• )LHOGEXVFRPPXQLFDWLRQdescribes how to install and
set up the fieldbus communication.
• 0DLQWHQDQFH describes what maintenance is needed.
• )XQFWLRQV describes all functions included in the soft-
starter, as well as the available minimum and maxi-
mum values and default values used.
• 7URXEOHVKRRWLQJ contains instructions on how to
quickly find and correct the most common faults.
• 'LDJUDPV contains a number of electrical diagrams for
the softstarter itself, and also some typical application
diagrams.
 5HYLVLRQQRWHV
Please check home page
ZZZDEEFRPORZYROWDJH
for latest information on revisions.