ABB PST Series - 6:1.2 Design

52 1SFC132003M0201
+XPDQ0DFKLQH,QWHUIDFH+0,
&KDSWHU
 'HVLJQ
The HMI consists of:
• Status indication LED indicators
•LCD display
• Selection and Navigation keys
The LED indicators works as follows:
The keypad is based on the same user concept as today’s
mobile phones.
The LCD display contains two rows which allow 20
characters each.
On the top row various information is presented,
depending on state. On the bottom row there are labels
indicating which function the selection keys currently
have.
A scrolling icon indicates what parameter or setting value
is possible to change at the position.
The 6HOHFWLRQNH\V normally have more than one function,
such as selecting, changing and storing, depending on
present dialogue, see text on the bottom row of the LCD
display.
The 1DYLJDWLRQNH\V are used for navigating in the menus
to the desired setting.
When selecting from a list, the scrolling is done in a closed
loop.
Power on ProtectionFault
1
2
3
4
)LJXUH +XPDQ0DFKLQH,QWHUIDFH
1
Status indication LEDs
2
LCD display
3
Selection keys
4
Navigation keys
7  +#
/GPW
/(' &RORU 'HVFULSWLRQ
Power on Green Supply voltage connected.
Fault Red Indicates faults.
Protection Yellow Indicates that protections are acti-
vated.
When Fault or Protection LED is activated, the LCD dis-
play displays the actual fault or protection.
Power on ProtectionFault
Power on ProtectionFault
1
1
)
LJXUH 0HQXH[DPSOHV
1
Scrolling icons
5GVVKPI+G #
%JCPIG $CEM
5GVVKPI+G #
5VQTG %CPEGN