ABB STT04 - Page 100

EBTH TEMPERATURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
B - 4
Enter the lower range temperature value and press
. Input the upper range value.
Select an initialization mode using the arrow keys.
Refer to the Platinum Standard Series Smart Tem-
perature Transmitter EBTH instruction for descrip-
tion.
Select a fail mode using the arrow keys.
Refer to the Platinum Standard Series Smart Tem-
perature Transmitter EBTH instruction for descrip-
tion.
Enter up to 6 characters. Use familiar units to
describe the output.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
Input the lower range value and press .
Input the upper range value.
Input the lower temperature alarm value and press
.
Input the upper temperature alarm value and press
.
Key Display Comments
ENTER
ENTER
LOWER RANGE VAL
nn.nn
o
C
UPPER RANGE VAL
nn.nn
o
C
ENTER
ENTER
INITIALIZE MODE:
→ LOW
HIGH
ENTER
FAIL MODE:
→ LOW
HIGH
LAST
ENTER
ENTER
SECONDARY UNITS
nnnnnn
ENTER
ENTER
SECONDARY L.R.
_nn.nn UNITS
SECONDARY U.R.
nn.nn UNITS
ENTER
ENTER
ENTER
LOWER TEMP ALARM
_nn.nn UNITS
UPPER TEMP ALARM.
nn.nn UNITS
ENTER
ENTER