ABB STT04 - Page 99

EBTH TEMPERATURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
B - 3
Enter a day and press . Enter a month and
press . Enter a year and press .
This date can represent the creation date of the con-
figuration, the date the device or element was
installed, or some other significant date.
For this example select T/C.
Select N type.
Choose the desired temperature unit.
Select LINEAR.
If FUNC GENERATOR is selected, specify 19 input
and output points between 0 and 100%.
Refer to the Platinum Standard Series Smart Tem-
perature Transmitter EBTH instruction for descrip-
tion.
Enter a value between 0 and 100. Refer to the Plati-
num Standard Series Smart Temperature Trans-
mitter EBTH instruction for description.
Key Display Comments
ENTER
ENTER
DATE:
DAY: nn
MONTH: nn
YEAR: nnnn
ENTER
ENTER ENTER
ENTER
SENSOR TYPE:
→ T/C RTD
mV OHMS
ENTER
THERMOCOUPLE
→ NBE
JKR
STC
ENTER
ENGINEERING UNIT
→
o
C
o
K
o
F
o
R
ENTER
OUTPUT TYPE:
→ LINEAR
FUNC GENERATOR
ENTER
OUTPUT ACTION:
→ NORMAL
REVERSE
ENTER
DAMPING:
(0-32 SEC)
nn.nn SECS