EQN TEMPERATURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
H - 2
Key Display Comments
Select NEW. To create a new configuration. To m od-
ify an existing configuration, select MODIFY. The
screen sequence is the same, however, the MODIFY
screens will appear with the values and cursor posi-
tions as originally configured.
Select ABB FSK.
Use the arrow keys to select EQN.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
For this example select ANALOG.
For this example select RTD.
CONFIG
CONFIGURATION
→ NEW
MODIFY
ERASE
ENTER
DEVICE TYPE
→ ABB FSK
HART
ENTER
TRANSMITTER TYPE
PTS EQS
BCN → EQN
AVS TBN cond
ENTER
STT04 CONFIGURATION
[]
←PREVIOUS NEXT→
ENTER
SELECT MODE:
→ ANALOG
DIGITAL
ENTER
SENSOR TYPE:
T/C → RTD
mV OHMS
To Next Page
Loading...
