XM/SM/XE MAGNETIC FLOWMETER
CREATE/MODIFY CONFIGURATION
I - 2
Key Display Comments
Select NEW to create a new configuration. To m odify
an existing configuration, select MODIFY. The
screen sequence is the same, however, the MODIFY
screens will appear with the values and cursor posi-
tions as originally configured.
Select ABB FSK as device type.
Use the down arrow key and select XM/SM/XE.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select ANALOG.
Move the indicator to your selection.
Refer to the Magnetic Flowmeter XM/SM/XE instruc-
tion for an explanation of terms.
CONFIG
CONFIGURATION
→ NEW
MODIFY
ERASE
ENTER
DEVICE TYPE
→ ABB FSK
HART
TRANSMITTER TYPE
AVS TB480 cond
TB580 pH TB581 ORP
→ XM/SM/XE
ENTER
STT04 CONFIGURATION
[]
←PREVIOUS NEXT→
ENTER
SELECT MODE:
→ ANALOG
DIGITAL
ENTER
FLOW DIRECTION:
→ FORWARD
REVERSED
To Next Page
Loading...
