TBN580 TRANSMITTER
CREATE/MODIFY CONFIGURATION
K - 4
Enter the lower range value and press . Input
the upper range value.
Refer to the Smart Specific Ion Transmitter Series
TBN580 instruction for description.
During continual diagnostics, if the microcomputer
detects a fatal problem the transmitter output will go
to 0% (low), 100% (high), or the last value before the
error.
Enter up to 6 characters. Use familiar units to
describe the output.
Input the lower range value and press . Input
the upper range value.
To store the configuration, select YES.
Key Display Comments
ENTER
LOWER RANGE VAL.
_nn.nn pH
UPPER RANGE VAL.
nn.nn pH
ENTER
ENTER
INITIALIZE MODE:
→ LOW
HIGH
ENTER
FAIL MODE:
→ LOW
HIGH
LAST
ENTER
ENTER
SECONDARY UNITS
_nnnnnn
ENTER
SECONDARY L.R.
_nn.nn UNITS
SECONDARY U.R.
nn.nn UNITS
ENTER
ENTER
STORE THIS
CONFIGURATION
NO
→ YES
ENTER
ID TAGNAME
READY
To Next Page
Loading...
