AS800 PRESSURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
P - 4
Refer to the AS800 Pressure Transmitter instruc-
tion for mode description.
Select the AS800 METER TYPE. Selecting NONE or
ANALOG will cause the configuration to proceed to
TEMPERATURE UNITS. Selecting ALPHANU-
MERIC will proceed to the METER VALUE selection.
Select LCD meter display variable. Use down arrow
key to select, then press
.
Select the AS800 TEMPERATURE UNITS. Use
arrow key to select option, then press .
Select YES.
Key Display Comments
ENTER
FAIL MODE:
→ LOW
HIGH
ENTER
METER TYPE:
→ ALPHANUMERIC
ANALOG
NONE
ENTER
METER VALUE
→ PRIMARY E.U.
% OUTPUT
PV % and EU
TV
PV CURRRENT
TEMPERATURE
3 1/2 DIGIT
ENTER
ENTER
TEMPERATURE UNITS
→ °C °F
°R °K
ENTER
ENTER
STORE THIS
CONFIGURATION?
NO
→ YES
ENTER
ID TAGNAME
READY
To Next Page
Loading...
