600T & 600T EN PRESSURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
Q - 15
Type a descriptor string using up to 16 characters.
This field can be used for notations about the device
or process.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
Enter a day and press . Enter a month and
press . Enter a year and press .
This date can represent the creation date of the con-
figuration, the date the device or element was
installed, or some other significant date.
Select 600T EN
Select LINEAR.
NOTE: Other output type selections are:
SQUARE ROOT
SQR (x^3)
SQR (x^5)
5th ORDER POLYNOMIAL
DOUBLE POLYN
Use
to return to a previous configuration
screen from any screen in the configuration process.
Enter a value between 0 and 16 seconds.
Select an engineering unit best suited for the
application. Other units not shown include
mmHg-0
o
C, PSI, BARS, mBAR, gSqCm, Kgcm2,
PA, KPA, torr-0
o
C, ATM, MPa, iH2O-4
o
C,
mmH2O-4
o
C.
Key Display Comments
ENTER
DESCRIPTOR:
←PREVIOUS NEXT→
ENTER
DATE:
DAY: nn
MONTH: nn
YEAR: nn
ENTER
ENTER ENTER
ENTER
CONFIG TYPE
600T
→ 600T EN
ENTER
OUTPUT TYPE
→ LINEAR
SQU (x)
SQR (x^3)
SQR (x^5)
5th ORD. POLY
DOUBLE POLYN
BACK
ENTER
DAMPING:
(0 - 16 SEC)
0.5 SECS
ENTER
ENGINEERING UNIT
→ iH20-20c
iHg-0
O
c
ftH2O-20c
mmH20-20c
To Next Page
Loading...
