5. Carefully pull and remove the outlet filter (C).
Caution: Prevent contamination of other parts of the EVSE. Make
sure that contamination on the filter does not come off.
6. Install the new air outlet filter. Make sure that the air flow direction that is
indicated on the air outlet filter corresponds with the air flow.
7. Push the cover to the rear.
8. Tighten the nuts.
9. Do the steps 3 to 8 again for the other air outlet filters.
10. Close the doors. Refer to section 8.2.
Maintenance and cleaning
68 9AKK108466A3703-EN | 001
To Next Page
Loading...
