Abbott i-STAT 1 System Manual

Art: 730078-00A Rev. Date: 26-Oct-11
10
12. In the Control Pass/Fail Determination section, click the Auto via eVAS radio button. Choosing
this option indicates that the handheld will automatically determine whether the liquid QC run
passed or failed, based upon QC ranges contained on an electronic Value Assignment Sheet
(eVAS) file downloaded into the i-STAT 1 handheld.
Note 12.1: The Manual Control Pass/Fail Determination feature is also customizable through the
i-STAT 1 handheld keypad.
1. Power on the i-STAT 1 handheld and press MENU to get to the Administration
Menu
2. Press 4 – Customization
3. Press 2 – Change
4. Type in your password and press ENT (If no password is set, just press ENT)
5. Press 4 – QC Tests
6. Press 2 – Cartridge QC
7. Press 1 to set Pass / Fail Method
13. If you want users to enter a Comment Code when liquid QC results are in-range, out-of-range,
or under both situations, check the appropriate box(es) in the Control Test Settings section and
then use the drop down menu to select whether entering the Comment Code is optional (Allow
no Comment) or Required (Require Comment).
Note 13.1: The Control Test Settings feature is also customizable through the i-STAT 1 handheld
keypad.
1. Power on the i-STAT 1 handheld and press MENU to get to the Administration
Menu
2. Press 4 – Customization
3. Press 2 – Change
4. Type in your password and press ENT (If no password is set, just press ENT)
5. Press 4 – QC Tests
6. Press 2 – Cartridge QC
7. Press 2 to set Comment Codes for in range results or press 3 to set Comment
Codes for out of range results

Abbott i-STAT 1 Specifications

General

Brand	Abbott
Model	i-STAT 1
Category	Measuring Instruments
Language	English