Art: 725768-00E Rev. Date: 04-Jan-12
14
3.15: Restart the RALS remote connection.
• Maximize the RRC Status window.
• Double click on Com1.
• Check the “Enabled” box.
• Enter the recorded “Host” and “ID” entry from step 3.5.
• Click “OK”.
3.16: Update the CLEW version in the Customization Workspace:
• Transfer the files
Access the main Customization Workspace page.
Click Update i-STAT/DE → Upload Update File
Insert the i-STAT Software and Documentation CD-ROM into the CD-
ROM drive of the computer you are using. (Note: this computer does not
need to be the i-STAT/DE Server.)
Browse to , click on , and
click Upload. (Note: the XXXXXX is the JAMS and CLEW version that
you are updating.) Immediately after uploading the CLEW/JAMS to the
i-STAT/DE server, i-STAT/DE will unpack the files and make them avail-
able for use in the handheld’s Customization Workspace.
• In the Customization Workspace, under the “Default customization profile:” column,
click on the “i-STAT Analyzer CLEW” button.
Note: Customization screens may vary depending upon the i-STAT/DE version in use.
To Next Page
Loading...
Need help?
General
