199
ADOBE PREMIERE 5.0
User Guide
If the frame size specified in Video Settings is less than about half the size of the display screen,
the resulting picture may appear coarse or with obvious pixels; however, this effect may be less
noticeable after recording on videotape.
• (Windows only) Select Zoom by 2 to double the height and width of the frame size for Print
to Video only. This is useful for project frame sizes 320x240 or smaller.
• For Screen Mode, choose Current to play on the main computer screen, or choose NTSC
if you have an NTSC monitor connected to your system. The plug-in software included with
some video-capture cards allows a temporary switch into the specified mode; see the documen-
tation that came with your video-capture card.
• Select Loop Playback to replay the video continuously.
For information about recording the Timeline on videotape, see “Creating a videotape”
on page 311.
To stop Print to Video playback:
Press Esc.
c00.book for PS Page 199 Tuesday, March 31, 1998 1:28 PM
To Next Page
Loading...