Getting Started
Attaching the Wrist Strap
Follow these instructions to attach the wrist
strap to your camera to facilitate easy
carrying:
1. Insert the short loop of the st
ap in the
strap ring.
2. Thread the larger loop of the strap thou
h
the short loop and pull tight to attach the
strap to the camera.
Inserting the Battery
Follow these instructions to insert the Li-ion battery into the battery compartment.
Please read “Battery Information” on page v before inserting/removing
batteries.
1. Make sure the power is off be
the batteries.
2. Open the battery
compartment at the
bottom of the
camera.
3. Insert the battery into the compartment
with the terminal facing inside the camera
and the battery indent next to the
compartment door.
4. Close the battery
compartment.
7
Chapter
2:
Getting
Started
To Next Page