AgfaPhoto OPTIMA 1338mT - Troubleshooting; Common Camera Issues and Solutions

T
r
oubleshootin
g
63
Problem Cause and/or Action
Camera does not turn on. The batteries may be exhausted. Charge or
replace the batteries.
Camera turns
off
t
ti
ll
Press any button except the Power button to turn
on the camera.
LCD turns blank. Press any button except the Power button to turn on
the
LCD
Empty battery icon is
displayed on the LCD, then
the camera turns off.
Batteries are exhausted, please replace or recharge.
LCD screen displays ‘No
image’.
The image file on the memory card. Image file format
may not be supported.
LCD screen displays
‘Not available for this
fil ’
Function is only available for specific file types.
File format is not supported.
LCD screen displays
‘Memory full’.
Memory card is full. Replace the memory card with a
new one or delete unnecessary images.
LCD screen displays ‘File
locked’
This file is locked. Unlock the file. See
“Protecting/ Unprotecting Files” on page 48.
LCD screen displays
‘Card locked’.
The memory card is protected. Remove the card and
slide the write-protect switch to its unlock position.
LCD screen displays
‘Format error’.
The memory card is protected. Remove the card and
slide the write-protect switch to its unlock position.
LCD screen displays ‘Copy
error’.
The memory card is protected. Remove the card and
slide the write-protect switch to its unlock position.
The memory card is full. Replace card or
delete unnecessary files.
No image displays on the TV
screen
Incorrect TV-out type was selected. Set the correct
TV-out type to match your TV system.
Troubleshooting