57
Agilent 1100 Series Diode Array and Multiple Wavelength Detector SL
User Manual
Agilent Technologies
4
Using the Detector
Setting up an Analysis 58
Before Using the System 58
Requirements and Conditions 60
Optimization of the System 62
Preparing the HPLC System 63
Running the Sample and Verifying the Results 72
Special Settings of the Detector 73
Control Settings 73
Configuration Settings 74
Online Spectra 75
Run Recovery Settings 76
Analog Output Settings 79
Spectrum Settings 80
Peakwidth Settings 82
Slit Settings 83
Margin for Negative Absorbance Settings 84
Optimizing the Detector 84
Special Setups with Multiple DAD/MWDs 85
This chapter provides information on how to set up the detector for an
analysis and explains the basic settings.
To Next Page
Loading...
Need help?
General
