10 Agilent 7890B Installation
1 Installing the GC
refer to the ALS installation documentation.
When installed as part of a complete system including an
Agilent data system (for example, Agilent OpenLAB CDS), first
install the GC through the checkout column bakeout step. Once
the bakeout ends, configure the new GC in the data system and
open the online instrument session. Use the data system to
perform the checkout test.
When installed as part of other complete systems, for example
in an Agilent GC/MSD or GC/MS system, see the installation
instructions for that system.
To Next Page
Loading...
Need help?
General
