92 Agilent 7890B Installation
B Cabling Diagrams and Remote Start/Stop
External event cable, G1530-60590
The external event cable has two passive relay contact closures
with two 24-volt control outputs. Devices connected to the
passive contact closures must be connected to their own power
sources.
The pin assignments for this cable are listed in Table 14.
717Violet
318Gray
19 White
20 Black
21 Brown
22 Red
23 Orange
24 Yellow
25 Green
26 Blue
Tabl e 1 3 BCD cable connections (continued)
Connector 1 Pin Connector 2 Pin Ribbon Cable Wire Color
4
5
6
3
12
78
Wire terminations
Apply label
G1580-87200
To Next Page
Loading...
Need help?
General
