12 Agilent 7890B Installation
1 Installing the GC
Unpacking
1 Inspect the shipping containers for damage. If a container is
damaged or shows signs of stress, notify both the carrier and
your local Agilent sales office.
Keep all shipping materials for inspection by the carrier.
2 Check the items received against the packing lists. If there
are discrepancies, notify your local Agilent sales office
immediately.
Keep the shipping containers until you have checked their
contents for completeness and verified instrument
performance.
3 Remove caps and packing.
Some detectors may have protective caps for shipping.
Remove these caps. If equipped with a side-mounted
detector, remove the left side panel to gain access to the
detector vent cap.
Open the oven door. Remove any packing from inside the
oven.
To Next Page
Loading...
Need help?
General
