60 Agilent 7890B Installation
1 Installing the GC
Select the appropriate gas pressure control device and press
[Enter].
8 Scroll to Thermal zone. Press [Mode/Type] to see the available
choices. In most cases this will be GC oven, but you may have
an MSD transfer line heated by an auxiliary zone, valves in a
separately-heated valve box or other configurations.
Select the appropriate Thermal zone and press [Enter].
This completes configuration for a single capillary column. Also
see the Operation manual for more information about
configuring columns.
To Next Page
Loading...
Need help?
General
