3 Setting Up the 850-DS
28 850-DS Operator’s Manual
Changing Trays / Needle Replacement
The 850-DS can support various sample tray configurations. The standard needle
block can support two trays - for test tube or 2 mL vial sample collection. Other
alternative sample trays including Agilent HPLC sample trays and 96-well plates
are also compatible. Use of these trays requires a modification to the needle
block assembly of the 850-DS. This conversion should only be performed by
qualified Agilent personnel. These sample tray kits are meant to be installed for
extended use and are not designed for frequent exchanges.
To Next Page
Loading...
