4 Operating the 850-DS
80 850-DS Operator’s Manual
User Access
Press User Access from the Main screen to assign the system access level,
modify functionality of the User Levels and, if enabled, regulate individual user
access. The 850-DS firmware supports a system-based level of control or access
to specific functions based on individual users. This distinction is governed by
the Username/Password Access feature (see User Access screen on page 81).
If the Username/Password Access feature is enabled, individual users are
assigned a Name, Password, and User Level and must log in to access the
850-DS firmware. Specific functionality is based on their User Level which is
defined by an Administrator of the system.
If the Username/Password Access feature is disabled, an Administrator may
toggle between the three available access levels available on the 850-DS. The
current access level is indicated by a green circle. Any user may change the
access level to a lower setting (e.g., Advanced User to User) without entering a
password. Any changes to a higher level (e.g., Advanced User to Administrator)
require a password.
To Next Page
Loading...
Need help?
General
