4 Operating the 850-DS
84 850-DS Operator’s Manual
Reading Temperatures
Displays during any temperature-read events on an Agilent dissolution
apparatus. Temperature-read events typically last about 40 seconds.
Method Stop Confirmation
Displays after you have pressed STOP while a method is running. It allows you to
confirm your intentions to stop or continue running the method.
Change Media
Notifies you that it is time to add or change media during a method. The elapsed
time is shown in the dialog. If the Pause Duration Alarm (“Pause Duration
Alarm” on page 56) time entered in the Alarms screen is exceeded, then an error
will be generated and noted in the method log.
Access Control
Used when changing access levels or when locking the display. It serves as a
generic password entry screen. You must enter access codes correctly twice
before any changes will be accepted.
Cleaning Cycle Complete
Displays when the cleaning cycle is complete.
To Next Page
Loading...
Need help?
General
