1b-10
Operation Reference
Function
If NUMBERED is selected, the next parameter to be selected is NUMBER as follows.
NUMBER is for setting the initial number of the numbered numeric message that will be transmitted.
The allowable range is 0 to 63.
If HEX/BIN is selected, the next setting to be selected is BLOCKING LENGTH:
• BLOCKING LENGTH indicates the bits per character as follows:
1BIT: 1 bit per character
7BITS: 7 bits per character
8BITS: 8 bits per character
14BITS: 14 bits per character
16BITS: 16 bits per character
Enter the message in the hexadecimal format to the MESSAGE NO. 6 in the message menu.
NOTE When 7BITS or 14BITS are selected, the total number of hexadecimal characters of
the message must be a multiple of 7 characters (28 bits).
Setting the Message The message menu looks like the following:
To Next Page
Loading...
