Programmer’s Guide 10-21
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-6 CAL Functions, 8712ET and 8714ET (3 of 3)
KEYSTROKES SCPI COMMAND
CAL, (continued) (Transmissn)
Normalize on OFF TRAC CH[1|2]SMEM,CH[1|2]SDATA;:CALC[1|2]:
MATH (IMPL/CH[1|2]SMEM);:DISP:WIND[1|2]:
TRAC[1|2] ON;TRAC[1|2] OFF
Cal Check
(see Table 10-10 on page 10-25)
(menu selection only)
More Cal
(see Table 10-11 on page 10-26)
(menu selection only)
See Table 10-11 on page 10-30 for Test Set calibration.
See Table 10-7 on page 10-22 for Fault Location calibration.
See Table 10-8 on page 10-23 for SRL calibration.
See Table 10-9 on page 10-24 for Power or Conversion Loss calibration.
To Next Page
Loading...
