4- 41
Printing, Plotting, and Saving Measurement Results
Saving Measurement Results
The S2P data will always represent the format array data, including effects of electrical delay and port
extensions. A CITIfile will be saved at the same time. To be consistent with previous versions, the CITIfile
data saved will represent the DATA array (corrected data) without effects of electrical delay or port
extensions.
CAUTION Using the smoothing feature or saving data displayed in time domain format may result in
invalid S2P data. Avoid using these functions when saving S2P files.
Here is an S2P example file for an 11 point measurement of a 20 dB attenuator:
# HZ S DB R 50
! Network Analyzer HP8753E.0611
50000000 56.74 15.178 20.219 2.0132 20.15 1.6658 36.188 123.52
250000000 53.015 1.7331 20.373 10.241 20.377 10.029 33.974 40.215
450000000 52.094 5.8173 20.391 18.555 20.387 17.96 31.287 61.778
650000000 51.758 8.02 20.189 26.18 20.112 26.061 29.427 153.37
850000000 50.95 11.472 20.163 34.743 20.198 34.195 24.719 137.83
1050000000 50.235 9.3562 20.178 42.682 20.19 42.289 25.102 81.096
1250000000 49.883 9.2574 20.142 50.854 20.223 50.407 27.582 25.509
1450000000 48.477 5.9944 20.201 58.917 20.21 58.436 33.828 35.237
1650000000 48.462 3.5156 20.161 67.008 20.188 66.587 44.184 62.912
1850000000 47.503 1840 20.15 74.862 20.208 74.616 36.893 35.384
2050000000 46.938 5.6538 20.167 83.048 20.256 82.874 30.385 74.001
To Next Page
Loading...
Need help?
General
