1-16
Making Measurements
Using Display Functions
Figure 1-10 Four-Channel Display
5. Press .
Observe that the amber LED adjacent to the key is lit and the CH4 indicator on the display has
a box around it. This indicates that channel 4 is now active and can be configured.
6. Press .
Markers 1 and 2 appear on all four channel traces. Rotating the front panel control knob moves marker 2
on all four channel traces. Note that the active function, in this case the marker frequency, is the same
color and in the same grid as the active channel (channel 4).
7. Press .
Observe that the amber LED adjacent to the key is lit. This indicates that channel 3 is now
active and can be configured.
8. Rotate the front panel control knob and notice that marker 2 still moves on all four channel traces.
To Next Page
Loading...
Need help?
General
