138 Agilent 1260 Infinity RID User Manual
9 Maintenance
Replacing the Detector’s Firmware
Replacing the Detector’s Firmware
To upgrade/downgrade the module’s firmware carry out the following
steps:
1 Download the required module firmware, the latest LAN/RS-232 FW
Update Tool and the documentation from the Agilent web.
• http://www.chem.agilent.com/scripts/cag_firmware.asp.
2 To load the firmware into the module follow the instructions in the
documentation.
Module Specific Information
There is no specific information for this module.
When The installation of newer firmware might be necessary
• if a newer version solves problems of older versions or
• to keep all systems on the same (validated) revision.
The installation of older firmware might be necessary
• to keep all systems on the same (validated) revision or
• if a new module with newer firmware is added to a system or
• if third part control software requires a special version.
Tools required • LAN/RS-232 Firmware Update Tool or
• Agilent Diagnostic Software
• Instant Pilot G4208A (only if supported by module)
Parts required # Description
1 Firmware, tools and documentation from Agilent web site
Preparations Read update documentation provided with the Firmware Update Tool.
To Next Page
Loading...
Need help?
General
