Agilent 1260 Infinity RID User Manual 59
Installing the Refractive Index Detector
3
Flow Connections
Flow Connections
Tools required ¼ inch wrench
Parts required # p/n Description
1 G1362-68706 Interface tubing kit
1 G1362-87300 Interfacing capillary
Hardware required Other modules
Preparations • Detector is installed in the LC system.
WARNING
Toxic, flammable and hazardous solvents, samples and reagents
The handling of solvents, samples and reagents can hold health and safety risks.
➔ When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor and follow good
laboratory practice.
➔ The amount of substances should be reduced to the minimal volume required for
the analysis.
➔ Do not operate the instrument in an explosive atmosphere.
NOTE
The flow cell is shipped with a filling of isopropanol (also recommended when the
instrument and/or flow cell is shipped to another location). This is to avoid breakage due to
subambient conditions.
To Next Page
Loading...
Need help?
General
