Agilent Technologies Triple Quadrupole LC/MS User Manual

4 Basic Operation
Switch LC stream to Waste
71 Agilent Triple Quadrupole LC/MS System User Guide
b Right-click an LC module in the Instrument Status window and select one
of the commands to change any non-method control parameters, if
needed.
c Monitor the baseline and adjust the plot to make sure the column is
equilibrated and the baseline stable. (See step 6 and step 7 in this
procedure.)
6 Set up to view real-time parameter values (actuals).
The Actuals window can be customized to display instrument conditions for
viewing.
a Click Actuals in the ribbon to display the Actuals window.
b Right-click the Actuals window and select Setup.
c Select parameters to appear in the Actuals window.

Agilent Technologies Triple Quadrupole LC/MS Specifications

General

Brand	Agilent Technologies
Model	Triple Quadrupole LC/MS
Category	Laboratory Equipment
Language	English