Agilent Technologies Triple Quadrupole LC/MS User Manual

4 Basic Operation
Setting Up an Acquisition Method
Agilent Triple Quadrupole LC/MS System User Guide 78
5 Set up the data analysis (DA) parameters.
A method can contain Qualitative Analysis parameters, Quantitative Analysis
parameters, or a combination. The Qual Automation check box is marked on
the Qual tab and the Quant Automation check box is marked on the Quant
tab.
a Select the DA tab.
b Optional. For information on the Data Conversions tab, refer to the online
help.
c Optional. On the Qual tab, mark the Qual Automation check box. The name
of the current Qualitative Analysis method is shown in the box. To change
the Qualitative Analysis method that is connected, click browse to select a
different method. When the Acquisition method is saved, the selected
Qualitative Analysis method is copied or linked to the Acquisition method.

Agilent Technologies Triple Quadrupole LC/MS Specifications

General

Brand	Agilent Technologies
Model	Triple Quadrupole LC/MS
Category	Laboratory Equipment
Language	English