2 INSTALLATION
The ANET3910-EN is a stand-alone module with an Ethernet connection to a Host PC.
This section contains the procedures used to install the Board Support Package (BSP)
and to setup the ANET3910-EN hardware. The latest BSP versions are also available
on the AIM download area (www.aim-online.com).
2.1 BSP Installation
The BSP contains a set of documents (User’s Manual, Programmers Guide, Reference
Manual), the Application Interface Library (API) DLL files, the Import Library (.LIB) with
the C Header-Files, some software samples, the compressed on board
software/firmware update file and add-ons (e.g. the AIM Network Detection Tool).
These files are automatically copied to the system (e.g. HOST PC) by installing the BSP
software package.
The software is available on DVD from AIM or via a download from AIM-Online,
instructions how to obtain the BSP via a download from AIM-Online are described in the
following chapter.
To install the BSP software from the AIM provided DVD or a download from
AIM-Online (www.aim-online.com)
1. If using the AIM provided DVD, insert the DVD into the DVD ROM drive.
The HTML Navigator will automatically start after a few seconds.
If the HTML Navigator does not start after a few seconds, the Navigator has
to be started manually. Navigate to the DVD ROM drive and double click the
index.html icon.
2. Choose the ANET3910-EN and store the setup.exe to your system.
3. To Start the BSP installation, double click to the setup.exe file.
To Next Page
Loading...
Need help?
General
