ANET3910-EN User’s Manual
Figure 3-16 Connect to ANET3910-EN with PBA.pro
After a re-start, PBA.pro should show the available ANET3910-EN MIL-Resources.
The figure below shows how it looks like for an ANET3910-EN.
3.1.7.2 Connect to a ANET3910-EN using the AIM API-Library
To connect to an ANET3910-EN via customer specific applications using the AIM
Application Programming Interface Library (API-Library), the following steps are
necessary.
Figure 3-17 Connect to ANET3910 with PBA.pro
To Next Page
Loading...