Aim STANAG3910 User Manual

3. Getting started
ANET3910-EN Users Manual
23
location of the update file in the BSP is /Onboard-SW/update-components/.
Figure 3-11 ANET Web Configuration Tool “Update tab”
During the update is in progress the update status is shown, don’t close the Web
Browser when the update is running.
Figure 3-12 ANET Web Configuration Tool “Update is running”
If the update has been finished successfully the status should look like shown below.
Press “Finish Update” button to finish the update and to download the Log-File.
In case any errors have been occurred during the update, may be to protocol can be
useful for the factory for further investigations.

Aim STANAG3910 Specifications

General

Brand	Aim
Model	STANAG3910
Category	Control Unit
Language	English