ANET3910-EN User’s Manual
First of all you have to enter a user name and password on the login screen, the default
login is:
User Name: ‘user’
Password: ‘aim’.
After a successful login, you will be forwarded to the System Overview page.
This page shows a summary of the current system status as shown in the figure below.
Figure 3-4 ANET Web Configuration Tool “System Overview”
3.1.4.1 Configuring basic properties
Click on the ‘General Settings’ tab in the navigation bar. You can now set an alias name for
the device or change the password for configuration access:
To Next Page
Loading...
