106
REPLACEMENT OF MAIN COMPONENTS
[ 15 TON ]
[Removal]
1. Drain engine coolant.
1) Clamp the engine coolant hoses at the outlet
and inlet ports of the radiator (2 places) with 2 hose
clippers.
2) Loosen the drain plug cap, and drain engine
coolant from the engine.
3) Clamp the oil hose with 2 hose clippers at both
sides of joint.
4) Remove the joint, and loosen one hose clipper
at a time to drain engine coolant of both sides.
5) Install the joint as before, and remove both hose
clippers.
2. Remove the 3 engine coolant hoses from the engine.
Clamping positions
Drain plug
Pump outlet side
Engine coolant pump
Clamping
positions
Joint
Engine coolant hoses
To Next Page
Loading...