AISIN SEIKI E1 Series - Page 260

258
TROUBLESHOOTING
Code No. /
functions
Operational procedure / display contents
15
Engine
throttle
valve open
position
16
Fuel gas
flow control
valve open
position
Monitor mode
Displays engine throttle valve open position (code No. 15) / fuel gas flow control valve open position
(code No. 16).
When fuel gas flow control valve open position is 238 steps
Check mode
Programs forced setting of engine throttle valve open position (code No. 15) / fuel gas flow volume
control valve open position (code No. 16).
Example) Method of engine throttle valve open position setting
Select command (Initial display)
During automatic operation During forced setting (110 → 294 steps)
↓
Press [SET] switch
↓
Press [SET] switch
During command setting
Automatic setting Forced setting
→
←
Switch by pressing [UP] + [DOWN] switches simultaneously for 1 second
↓
Change the flashing digit data
with [UP] or [DOWN] switch.
Switch by pressing [UP] +
[DOWN] switches simulta-
neously for 1 second
↓
Press [SET] switch (Flashing
digit moves to the right)
↓
Change the flashing digit data
with [UP] or [DOWN] switch.
(with digit up/down)
↓
Press [SET] switch (Flashing
digit moves to the right)